You have to start the engine up pressing enter then shift. When the engine starts up, you use the right key to rev up the engine, or the left key to rev down I'd recommend revving up to 2000rpm for a good start. After the engine revs up nicely, you press the up key, then put a gear (use the numbers 1 to 3, not the numpads), then you let go the up key, a couple of times (press it and let it go to have a smooth start of the vehicle). When you're at a good speed (around 40km/h will do) you can shift to second gear, press up then 2 then let go the up key and you'll be in second gear. You can also just rev up the engine to the max speed and just press 1 but if you want a smooth start you do it that way
Rev up the engine to the max throttle using the right key, then press 1. After you're in a good speed (between 24 and 48km/h) you can slow down the engine to the speed you want, or you can leave it with max throttle for full speed.
What do you mean by adding controls to the scene itself? You mean an interactive scene?
Yeah the suspension issue was because of how I designed the front wheel cover. I should've made it deeper but I sacrificed deepness for looks haha
My scripting knowledge is pretty small, but I'll try to make a scripted leg in my next motorcycle!
What? I did not understand.
The battery light comes off after the car hits around 1k rpm. I just tested and everything works as intended, could it be an one time issue?