This was pretty hard to make, but it turned out to be very reliable. I've tried making a detachable mag, and it worked, but not as good as with a fixed one. So don't bother, deal with it
The mag holds 27 rounds, but the real RPK has 45 xD
To operate:
Cycle action, select the firing mode (please use 1*10^6 for this, it's quite fragile) and press Return/drag the trigger. I reccomend pressing return because of the recoil effect.
The firing mode is like this: At the top is safe, on the middle is semi-auto and at the bottom is full-auto
I've been inspired by ngphil's RPK (just a bit, 'cause I remembered he did one when I was at half the work). Big thanks to him!
Please rate and comment. I appreciate feedback, and if anything fails to work, tell me.
I'd appreciate if you could move the body back to see what's going on there. It's grouped, so it won't be hard!
Also, when you load the round into the chamber, sometimes it will look like if it didn't load. It does but the bolt has some damping and loads of strenght, so it's very smooth.
Improved everything, from reloading and ejection to bolt and hammer, also gas piston. THIS IS A REPOST; BECAUSE NOONE HAD SEEN THE OLD VERSION. Also vaidas369 hadn't rated
.png)
