Algodoo

Excellent! 10/10
I want the FF specification.

thank you !!

what is the FF specification?

Nice! Check out my Clio too: http://www.algodoo.com/algobox/details.php?id=49059

This car runs on front wheel I think, that's what cata wants to say.
I still don't know how it runs this fast

It's strange because i read the V6 version runs on rear wheels. (cf: http://www.zeperfs.com/fiche1100-renault-clio-ii-v6.htm ) and on some other websites.

Ah Ah Ah .Restitution of the wheel and the ground (I think I put 0 or 0.1). the frequency of 500hz (on 200hz it stops at 300km/h I believe). And the motor can turn at 1000 RPM (1400 RPM on low gears/low speed). In my motor I spawn 2 circles by cycle with 2 spawn'circles (2 blue, 2 red, 2 yellow on each cylinders). Maybe that's why it runs so fast and so strong (I said you I will make a smaller but as fast as the bigger one )

So now the ONLY differences with the real it's the spoiler ( a little bit smaller on the real) and the gearbox, I use a 5 gears semi-automatic and the real use a 6 manual (but manual are hard to make and bigger so it would lag )

OUPS: the real speed is not 320km/h but 245km/h (I don't konw what I said 320 )

Very well made!
It's not necessary to run at 500hz, and it's not as powerful as you say (0-100 ~7-8 sec).

Oh, well I haven't noticeed that it runs at 500 Hz. If you make a scene with an engine, please try not to increase frequency

thank you kilinich, and you've right, it's about 7.8s sorry
500hz it's to have the best performance 400 or 350 works good to.

Why can I not increase the frequency with an engine ?

Because the ard part of maing a car with engine is to make the engine fast and strong. If you increase frequency you get more power, which is pretty much frowned upon. It's like on a spring engine, you've got a slider that if you increase, the power increases. It's too easy!
Try to make a strong engine at 100 Hz or 150 in the most desperate case!

ok that's what i thought. so, in 100 hz i beleive my car go to 250km/h, so it's the real speed (or 240). But the acceleration will be bad.

So, I will work again on it to have a good acceleration ( a good torque).

Let's work !!