Algodoo

This was modified from Locke's, "Automatic Shotgun." You can find it here: http://www.algodoo.com/algobox/details.php?id=43525

Anyways, I sped up the trigger response time, added a lower barrel (there was none... ), moved the charging handle to an AR-15 style location and a pump-action handle in the front (they both work), improved shell ejection rate by adding a little, "pusher," that would motivate any shells that didn't want to eject, and a bolt half the weight (all those things attached to the bolt reduced reliability due to excessive weight). Oh, and there's an ejection door and a guide rail to make magazine insertion easier.

(5) 6-round magazines (modified from original to have a capacity viewing window) filled with original design shells (8-projectiles, but only 3 buck size), and (3) containers filled with (10) original 8-shot 3 buck shells, (10) slug shells, and (10) 21-shot 3 buck shells, respectively.

TROUBLESHOOTING:
If the shell does not eject or a new one does not load because the old shell is still in the chamber, pull back either charging handle to hopefully eject the old shell and chamber a new one. If this does not work, pull the shell back until the ejection window's left part is fully in the shroud (alternative description: until the light grey polygon is colliding with the rear of the reciever), and then pull up. If this does not work, you are most likely out of shells.

INFO:
Made in Phun 5.28

OTHER:
Have PHUN!

EDITS:
12.19.11
I found out that there's a big stink regarding the original creation of this shotgun. Anyways, whoever made it, you did great. Culprits:

phunisawesome
http://www.algodoo.com/algobox/details.php?id=35087
http://www.algodoo.com/algobox/details.php?id=35198

tommy2010
http://www.algodoo.com/algobox/details.php?id=40082
http://www.algodoo.com/algobox/details.php?id=39893
http://www.algodoo.com/algobox/details.php?id=39895

TO FIRE (derp on me):
Press and hold enter.