Algodoo

A VERY large base i made, that is *possible* to move,
It has a lot of controls (gobbles up half the keyboard ) and can't move on it's own, the controls are on the "computer" inside it, It also comes with the truck I made (See previous upload), it is also to scale, (import the ragdoll to see) Let me know if you find a way to move it ,Safely,
Check out the new mega base
http://www.phunland.com/phunbox/details/27607
EDIT: Now has a crane that can lift it and put it down

Controls
J and L to move the "arms" on it for raising vehicles or to move the whole base upwards
U and Y to open and close the doors that seal of the base
N and M to rotate the table out
V and B to raise and lower beds
T to open and close the door leading to the contol area/table
I and K to raise and lower the lift for vehicle storage
O and P to open the half doors that keep the vehicles from sliding out
Right and Left Arrow keys to move truck
A to brake
Up and Down to flip gun out on truck.
W and S to aim gun on truck
D to "Fire"
R and F to move the crane
E to brake
1 and 2 to lift and lower the crane
3 and 4 to open and close the hook

Lifting Procedure:
Move the crane until it is above the grab area on the base
Press L to make the base Go up until you can grab it
Press 4 to close the hook
Press 1 or 2 (it doesn't matter) until the base is off the ground
Move to the desired location
press 1 or 2 until the base "feet" are touching the ground
Release the base

Vehicle storage and unloading procedure:
Drive a vehicle onto the "feet" of the base
Press J to raise the "feet" until it is at the top,
Drive vehicle to the center
Press O or P toopen the half door for storage compartment
Press I to lift the vehicle up to the storage compartment
Drive vehicle into compartment
Press O or P again to close the half door

Unloading:
Press i until the lift is at the top
Press O or P to open the half door
Drive vehicle onto lift,
Press K to lower the vehicle down
Press J until the "arm" is at the top
Drive onto the "arm"
Press L until the "arm" is touching the ground
Drive off the "arm"

Please note that I am constantley updating it (mostly little things)
Edit: Wow 150 downloadz!