Algodoo

This is one of the slower and the more complex pieces of machinery on the rails.

But it does what it says on the box. it lays my 16ft track one after the other.

Controls are:
Down arrow key (break (non-number pad))
Press 0 or 1 to start the conveyor moving (depending on the direction)
Because of it`s complex working I think that I`d probably have to include an instruction paragraph

Instructions:
*Only Push the flatcar to were you want to lay track with a separate locomotive sense the flatcar is built from the boxcar`s chassie which doesn`t include a motor.
*Press 0 or 1 to start the conveyor.
Wait for the conveyor to move 1 piece of track out (most of the track laying time is waiting)
*when the end of the track drops down and hits the coupling (this is meant to happen) you have to push the track into place.
*When you`ve got it into it`s final place pull back and the track should come off the couplings quite nicely.
Secure it into place and there you go.

your first piece of track is layed.

Features:
*Huge bars at each end to stop more then one piece of track coming off at once.
*conveyor (press 0 or 1 (to activate in either direction)).
*company colours.
*Working hornby style couplings
*suspension (it has got a lower design of suspension especially made to cope with low vehicles). Not sure if it`s as fragile as the other design of suspension.

Up coming features:
Animated brakes
More piratical coupling system (to make coupling easier).
coupling shock absorbers (to absorb the bump when coupling and when slack appears.)

Reply to me on ben2337@googlemail.com

If you upload a video onto the internet please ask permission on the E-mail mentioned before.

You can change any of the key assignments.