[Work In Progress] Mercedes - AMG ONE

Discuss scenes and videos made with Algodoo.

[Work In Progress] Mercedes - AMG ONE

Postby faytree » Fri Apr 26, 2019 6:24 am

I've always been a fan of this car back before I haven't seen it yet (via teasers, etc). And it has been a pleasure for me to reach this far in developing this car with the help of The Linkage.

So far, I only have myself done with the engine. Goes for around 590-650hp at around 11,000 rpm. The fastest engine I've ever made with some other interesting features added to it in order for it to reach a speed that high, again with The Linkage's help.
Image

I honestly can't wait to finish this thing before I have to go to college later next month.

waiting for semester break to come...
User avatar
faytree
 
Posts: 947
Joined: Mon Nov 05, 2012 1:37 pm
Location: Selangor, Malaysia

Re: [Work In Progress] Mercedes - AMG ONE

Postby Ken3344 » Sat Apr 27, 2019 8:11 pm

Cool! How will it work?
Hello my name is Kenlimepie. I'm an Algodoo Enthusiast, and Marble Racer. I run a Youtube channel which is about Algodoo Marble Racing, but I am not afraid to design new ideas in this program. https://www.youtube.com/c/kenlimepie
Ken3344
 
Posts: 53
Joined: Mon Sep 05, 2016 8:44 pm

Re: [Work In Progress] Mercedes - AMG ONE

Postby faytree » Wed May 01, 2019 7:34 am

Ken3344 wrote:Cool! How will it work?


Well, probably like how most of my cars work including a standalone EV mode. Not sure if I want to add fuel to this car just yet.
First thing's first, I have to figure out how to make 3 (originally 4, where 2 of them control each front wheel but I fused them as one because this is in 2D) attraction motors work in harmony without destroying each other first...
waiting for semester break to come...
User avatar
faytree
 
Posts: 947
Joined: Mon Nov 05, 2012 1:37 pm
Location: Selangor, Malaysia

Re: [Work In Progress] Mercedes - AMG ONE

Postby faytree » Tue May 07, 2019 7:51 am

scrapped the attraction motors, and I replaced it with normal motors.

What you see is basically the entirety of the car's powertrain, clocking up to over 1,200hp (may consider fusing those 2 motors at the right corner as one). Adding from the instant torque supplied by those motors, I'm assuming that this thing could have some of the most insane acceleration
Image
waiting for semester break to come...
User avatar
faytree
 
Posts: 947
Joined: Mon Nov 05, 2012 1:37 pm
Location: Selangor, Malaysia

Re: [Work In Progress] Mercedes - AMG ONE

Postby Ken3344 » Wed May 08, 2019 10:51 pm

How's progress?
Hello my name is Kenlimepie. I'm an Algodoo Enthusiast, and Marble Racer. I run a Youtube channel which is about Algodoo Marble Racing, but I am not afraid to design new ideas in this program. https://www.youtube.com/c/kenlimepie
Ken3344
 
Posts: 53
Joined: Mon Sep 05, 2016 8:44 pm

Re: [Work In Progress] Mercedes - AMG ONE

Postby faytree » Fri May 10, 2019 9:54 am

Ken3344 wrote:How's progress?

It's doing pretty alright. I might need to double check the powertrain, the gearbox is ready (I just need to make the shifter).
I may re-use some parts I used on my old Supra, mainly the chassis (it was meant to be modular anyway) to save time.

I'll probably continue developing this car in the next few weeks
waiting for semester break to come...
User avatar
faytree
 
Posts: 947
Joined: Mon Nov 05, 2012 1:37 pm
Location: Selangor, Malaysia

Re: [Work In Progress] Mercedes - AMG ONE

Postby faytree » Sat May 25, 2019 3:38 am

Image
waiting for semester break to come...
User avatar
faytree
 
Posts: 947
Joined: Mon Nov 05, 2012 1:37 pm
Location: Selangor, Malaysia

Re: [Work In Progress] Mercedes - AMG ONE

Postby faytree » Tue Oct 22, 2019 4:51 am

I barely have any desire left to finish it, the car's powertrain and stuff are ready. Its performance has been proven months ago and only improved recently, here are the stats:|
0-62mph (0-100km/h): ~1.9 seconds
0-217mph (0-350km/h): ~10.0-10.5 seconds
top speed: >370km/h (~230mph) 385km/h (~239.228mph) when the frontal hybrid motor is disengaged
total mass: ~1300kg

maximum power: ~ at least 1560bhp
maximum torque: ~2144Nm

Image
waiting for semester break to come...
User avatar
faytree
 
Posts: 947
Joined: Mon Nov 05, 2012 1:37 pm
Location: Selangor, Malaysia


Return to Scenes

Who is online

Users browsing this forum: No registered users and 2 guests