Error collision solids and hinge
11 posts • Page 1 of 1
Error collision solids and hinge
I model the mechanism of the cam. Properly designed mechanism is not working properly because of falling through two rigid bodies in one another ... Here is an example, to change the spring force or the amount of cargo it is impossible. It is necessary that the two bodies are facing were absolutely rigid and without friction (couple cam follower). Tried in Phun, where the intersection of solids correct, but trembles hinge ... In Algodoo wrong intersection hinge does not tremble. In Algodoo comes just two errors:
1) hinge changes its position.
2) Wrong intersection of solids.
How to fix?
1) hinge changes its position.
2) Wrong intersection of solids.
How to fix?
- Excalibur921
- Posts: 8
- Joined: Fri Dec 19, 2014 1:55 pm
Re: Error collision solids and hinge
Try increasing the sim frequency, increase the size and the density of the objects is also a common practice. Algodoo/phun do not like dealing with thin object collisions.
When asking for help, READ THE STICKIES!
- electronicboy
- Posts: 1694
- Joined: Mon Aug 31, 2009 6:18 pm
Re: Error collision solids and hinge
just increase density
Dream of Algodoo as game development engine...
-
Kilinich - [Best bug reporter 2010]
- Posts: 2098
- Joined: Mon Aug 31, 2009 8:27 pm
- Location: South Russia
Re: Error collision solids and hinge
Excalibur921 wrote:“increase density” Thank for help.electronicboy wrote:Try increasing the sim frequency
How and where?
sim.frequency = 200
In console or via GUI: Optinos -> Simulation -> Simulation frequency slider
Dream of Algodoo as game development engine...
-
Kilinich - [Best bug reporter 2010]
- Posts: 2098
- Joined: Mon Aug 31, 2009 8:27 pm
- Location: South Russia
Re: Error collision solids and hinge
You could increase the density of the cam or the plate, or both. Raising sim frequency like Kilinich said will also help.
Or you could just use a crank. Crank and cam work similarly but cranks work better because you have no surface-to-surface contact.
Or you could just use a crank. Crank and cam work similarly but cranks work better because you have no surface-to-surface contact.
(/)(°,,,°)(/)
-
pnvv - Posts: 670
- Joined: Tue Aug 26, 2014 11:46 pm
- Location: Disunited States of America
Re: Error collision solids and hinge
Kilinich wrote:sim.frequency = 200
Helped, thank you.
- Excalibur921
- Posts: 8
- Joined: Fri Dec 19, 2014 1:55 pm
Re: Error collision solids and hinge
Also, you could change solver for collision (to avoid penetration)
Sim.directContactSolveAll=true
Sim.directContactSolveAll=true
Dream of Algodoo as game development engine...
-
Kilinich - [Best bug reporter 2010]
- Posts: 2098
- Joined: Mon Aug 31, 2009 8:27 pm
- Location: South Russia
Re: Error collision solids and hinge
Also, you could change solver for collision (to avoid penetration)
Sim.directContactSolveAll=true
Sim.directContactSolveAll=true
Dream of Algodoo as game development engine...
-
Kilinich - [Best bug reporter 2010]
- Posts: 2098
- Joined: Mon Aug 31, 2009 8:27 pm
- Location: South Russia
11 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests