Algobots Tournament 2011
32 posts • Page 1 of 2 • 1, 2
Algobots Tournament 2011
As crytek has stopped his Algobots Tournaments I thought I would re-start this tradition with a simple round.
Here are the requirements:
It has to fit in the green box given.
Must have at least 3 wheels but no more than 5
Must not use the thrust tool (In the new Algodoo 1.9.0b)
No more than 3 chains (or ropes)
Only 2 weapons
Information:
Algobots Tournament is a challenge consisting of 2 teams (Blue and Red) where your Algobots battle it out on the arena. The winning Algobot moves on to the next round competing with the winner of the other round. Please note sometimes the Algobots can battle their own team.
If you submit an Algobot please make sure you write in the description of your scene (Post me the link to the scene) The name of the Algobot and what weapons it consists of.
I will pick the first 4] people to submit their Algobots.
Link: http://www.algodoo.com/algobox/details.php?id=56821
Here are the requirements:
It has to fit in the green box given.
Must have at least 3 wheels but no more than 5
Must not use the thrust tool (In the new Algodoo 1.9.0b)
No more than 3 chains (or ropes)
Only 2 weapons
Information:
Algobots Tournament is a challenge consisting of 2 teams (Blue and Red) where your Algobots battle it out on the arena. The winning Algobot moves on to the next round competing with the winner of the other round. Please note sometimes the Algobots can battle their own team.
If you submit an Algobot please make sure you write in the description of your scene (Post me the link to the scene) The name of the Algobot and what weapons it consists of.
I will pick the first 4] people to submit their Algobots.
Link: http://www.algodoo.com/algobox/details.php?id=56821
- Bazinga
- Posts: 25
- Joined: Sun Mar 13, 2011 10:14 am
Re: Algobots Tournament 2011
I might also add as a rule that nobody abuses weight. No purposeful overlapping or cloning onto itself for added weight.
![Image](http://statcdn.worldoftanks.eu/comeu_v1/uploads/signatures/wotbigbar02.jpg)
-
Under Ground - Posts: 819
- Joined: Mon Aug 31, 2009 6:52 pm
- Location: In A Cave, Somewhere On Mars.
Re: Algobots Tournament 2011
What version of Algodoo will the competition be in?
What is the maximum weight limit?
Is there a maximum motor power/speed?
Is "wheel" defined as a circle in contact with the ground?
To what extent may scripting be used?
Is there some sort of arena?
What decides when a bot is beaten by another?
What are the slider limits for friction, restitution etc?
Are wheels the only along allowed way of moving?
Is the bot meant to be automatic?
What is the maximum weight limit?
Is there a maximum motor power/speed?
Is "wheel" defined as a circle in contact with the ground?
To what extent may scripting be used?
Is there some sort of arena?
What decides when a bot is beaten by another?
What are the slider limits for friction, restitution etc?
Are wheels the only along allowed way of moving?
Is the bot meant to be automatic?
Last edited by Ravenplucker on Sat Aug 13, 2011 7:39 am, edited 3 times in total.
TheWonkits wrote:You can't do cartwheels when you're bored. Biological impossibility; they're fueled by joy.
Phundamentalist
- Ravenplucker
- Posts: 644
- Joined: Thu Jan 06, 2011 6:22 pm
- Location: Sydney, Australia
Re: Algobots Tournament 2011
I think it's most important that the bots have limited weight, motor torque and number of motor hinges, friction slider values (2) and that it would be most fair if the bots were automatic and in a symmetric arena.
![Image](https://dl.dropboxusercontent.com/u/11983574/Algodoo/Forum/attachment.gif)
-
Ivan - Posts: 202
- Joined: Tue Oct 06, 2009 2:01 pm
- Location: Croatia
Re: Algobots Tournament 2011
I saw the videos of the battles and it seems bots have weight limits and as Ivan said also friction (and restitution) limits; the arena is symmetric and yes, weapons are automatic
By the way I suggest these limits:
Density limit: from 1 to 15 kg/m²
Restitution limit: from 0 to 2
Friction limit: from 0 to 1
Attraction limit: from -1 to 3 Nm²/Kg²
Max hinge speed related to wheels colliding with the ground: 50 RPM
Max hinge speed related to everything not colliding with the ground: 200 RPM
Max hinge torque (for both of them): inf
Important rule: the "external shape" of you algobot must collide with A (the collision group of the ground)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Density limit: from 1 to 15 kg/m²
Restitution limit: from 0 to 2
Friction limit: from 0 to 1
Attraction limit: from -1 to 3 Nm²/Kg²
Max hinge speed related to wheels colliding with the ground: 50 RPM
Max hinge speed related to everything not colliding with the ground: 200 RPM
Max hinge torque (for both of them): inf
Important rule: the "external shape" of you algobot must collide with A (the collision group of the ground)
![Image](http://i54.tinypic.com/20k3uwx.jpg)
-
PhunWars - Posts: 78
- Joined: Wed Dec 30, 2009 11:01 pm
Re: Algobots Tournament 2011
Very good. I agree with every of PhunWars' suggestions except the density limit.
Instead of a density limit, i suggest a mass limit (from 1 to 5000 kg) because you can make 100 boxes with the size of 8 m² and density 15 kg/m² and get a 12000 kg bot.
I also suggest to limit the scripting to no scripting neither changing any value in the script menu.
Instead of a density limit, i suggest a mass limit (from 1 to 5000 kg) because you can make 100 boxes with the size of 8 m² and density 15 kg/m² and get a 12000 kg bot.
I also suggest to limit the scripting to no scripting neither changing any value in the script menu.
Last edited by Ivan on Sun Aug 14, 2011 10:57 pm, edited 1 time in total.
![Image](https://dl.dropboxusercontent.com/u/11983574/Algodoo/Forum/attachment.gif)
-
Ivan - Posts: 202
- Joined: Tue Oct 06, 2009 2:01 pm
- Location: Croatia
Re: Algobots Tournament 2011
I'd love to participate, but the rules seem kind of vague. In the case of scripting, I agree. At least no scripting that affects the other robot. If it's just for the function of the actual robot, it should be fine.
- NilsMolinder
- Posts: 36
- Joined: Fri Jun 17, 2011 11:48 pm
Re: Algobots Tournament 2011
Well yes that's true Ivan, I didn't think about that
And about scripting will spawning be allowed ? For guns for example (spawned objects should respect the general rules of restitution attraction etc)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Image](http://i54.tinypic.com/20k3uwx.jpg)
-
PhunWars - Posts: 78
- Joined: Wed Dec 30, 2009 11:01 pm
Re: Algobots Tournament 2011
I'd love to participate, but the density limit makes it impossible. It is far too difficult to make something stable that size with such low densities.
-
ImaPirate - Posts: 65
- Joined: Mon Oct 12, 2009 6:24 pm
Re: Algobots Tournament 2011
Ravenplucker wrote:What version of Algodoo will the competition be in?
What is the maximum weight limit?
Is there a maximum motor power/speed?
Is "wheel" defined as a circle in contact with the ground?
To what extent may scripting be used?
Is there some sort of arena?
What decides when a bot is beaten by another?
What are the slider limits for friction, restitution etc?
Are wheels the only along allowed way of moving?
Is the bot meant to be automatic?
It has to be automatic, no scripting, no kill parts, maximum speed for a motor-15, max strength for a motor-9000
A bot is claimed defeated when he falls off the battle platform when hopefully if I get the designs right will release a firework from the ceiling.
- Bazinga
- Posts: 25
- Joined: Sun Mar 13, 2011 10:14 am
Re: Algobots Tournament 2011
ImaPirate wrote:I'd love to participate, but the density limit makes it impossible. It is far too difficult to make something stable that size with such low densities.
Any density is welcomed. Just, don't make it airborne.
- Bazinga
- Posts: 25
- Joined: Sun Mar 13, 2011 10:14 am
Re: Algobots Tournament 2011
PhunWars wrote:Well yes that's true Ivan, I didn't think about thatAnd about scripting will spawning be allowed ? For guns for example (spawned objects should respect the general rules of restitution attraction etc)
The spawned objects could NOT in any way be used as a weapon but may be used to propel the vehicle.
- Bazinga
- Posts: 25
- Joined: Sun Mar 13, 2011 10:14 am
Re: Algobots Tournament 2011
NilsMolinder wrote:I'd love to participate, but the rules seem kind of vague. In the case of scripting, I agree. At least no scripting that affects the other robot. If it's just for the function of the actual robot, it should be fine.
Yes, scripting is allowed to somehow propel the vehicle upright in case it falls over.
- Bazinga
- Posts: 25
- Joined: Sun Mar 13, 2011 10:14 am
Re: Algobots Tournament 2011
Ivan wrote:I think it's most important that the bots have limited weight, motor torque and number of motor hinges, friction slider values (2) and that it would be most fair if the bots were automatic and in a symmetric arena.
I'll post a preview of the arena asap. I need to go to school now so it'll be up in 6-8 hours.
- Bazinga
- Posts: 25
- Joined: Sun Mar 13, 2011 10:14 am
Re: Algobots Tournament 2011
Are you going to modify the OP?
So I could make my bot 10,000,000,000 kg/m2 and that would be allowed by the rules?
Bazinga wrote:Any density is welcomed. Just, don't make it airborne.
So I could make my bot 10,000,000,000 kg/m2 and that would be allowed by the rules?
TheWonkits wrote:You can't do cartwheels when you're bored. Biological impossibility; they're fueled by joy.
Phundamentalist
- Ravenplucker
- Posts: 644
- Joined: Thu Jan 06, 2011 6:22 pm
- Location: Sydney, Australia
Re: Algobots Tournament 2011
Forgive me. ![Razz :P](./images/smilies/icon_razz.gif)
RPM is already technically plural, as it stands for Rotations Per Minute.
If you pluralize it from there, you get things like 15 Rotations Per Minute-S, which sounds just wrong.
( That's also why you can't find a tachometer with 'RPMs' written on it. )
![Smile :)](./images/smilies/icon_e_smile.gif)
---
Back to topic.
@Ravenplucker
Even when a max density is not listed one should use reason in deciding what is too much.
You know full well that that's over-kill and a half, and thus the answer would likely be, 'No.'
![Razz :P](./images/smilies/icon_razz.gif)
RPM is already technically plural, as it stands for Rotations Per Minute.
If you pluralize it from there, you get things like 15 Rotations Per Minute-S, which sounds just wrong.
( That's also why you can't find a tachometer with 'RPMs' written on it. )
![Smile :)](./images/smilies/icon_e_smile.gif)
---
Back to topic.
@Ravenplucker
Even when a max density is not listed one should use reason in deciding what is too much.
You know full well that that's over-kill and a half, and thus the answer would likely be, 'No.'
-
ImaPirate - Posts: 65
- Joined: Mon Oct 12, 2009 6:24 pm
Re: Algobots Tournament 2011
ImaPirate wrote:Forgive me.
RPM is already technically plural, as it stands for Rotations Per Minute.
If you pluralize it from there, you get things like 15 Rotations Per Minute-S, which sounds just wrong.
( That's also why you can't find a tachometer with 'RPMs' written on it. )
---
Back to topic.
@Ravenplucker
Even when a max density is not listed one should use reason in deciding what is too much.
You know full well that that's over-kill and a half, and thus the answer would likely be, 'No.'
No 15 rpm for the wheels/transport device. Your weapon can go up to 100 rpm.
- Bazinga
- Posts: 25
- Joined: Sun Mar 13, 2011 10:14 am
Re: Algobots Tournament 2011
What version of Algodoo will the competition be in?
What is the maximum weight limit?
Does the rpm limit apply to motors, or any rotating part of the robot?
To what extent may scripting be used?
Only as a way or getting the robot off the ground if it's been flipped, or other applications?
What are the slider limits for friction, restitution etc?
Are wheels the only allowed way of moving?
There are two glitching cogwheels in the centre.
And you do realise the maximum allowed size of the robot takes up more than half of the arena, don't you?
Do everybody a favour, and actually plan your contests instead of blindly mashing your face against the keyboard.
What is the maximum weight limit?
Does the rpm limit apply to motors, or any rotating part of the robot?
To what extent may scripting be used?
Only as a way or getting the robot off the ground if it's been flipped, or other applications?
What are the slider limits for friction, restitution etc?
Are wheels the only allowed way of moving?
Bazinga wrote:http://www.algodoo.com/algobox/details.php?id=56924
There's the template
There are two glitching cogwheels in the centre.
And you do realise the maximum allowed size of the robot takes up more than half of the arena, don't you?
Do everybody a favour, and actually plan your contests instead of blindly mashing your face against the keyboard.
TheWonkits wrote:You can't do cartwheels when you're bored. Biological impossibility; they're fueled by joy.
Phundamentalist
- Ravenplucker
- Posts: 644
- Joined: Thu Jan 06, 2011 6:22 pm
- Location: Sydney, Australia
Re: Algobots Tournament 2011
Bazinga wrote:Any density is welcome. Just, don't make it airborne.
Yes, this is true.
Ravenplucker wrote:So I could make my bot 10,000,000,000 kg/m2 and that would be allowed by the rules?
Again, this is true. But your bot's area should be 0.5 mm² to fit the mass limit I set in the previous post (5000 kg).
Bazinga wrote:Even when a max density is not listed one should use reason in deciding what is too much.
You know full well that that's over-kill and a half, and thus the answer would likely be, 'No.'
The overkill is more then 5000 kg, forget the density.
I don't want to read a word more about density.
Bazinga wrote:Yes, scripting is allowed to somehow propel the vehicle upright in case it falls over.
I support, but no spawning (which increases mass).
![Image](https://dl.dropboxusercontent.com/u/11983574/Algodoo/Forum/attachment.gif)
-
Ivan - Posts: 202
- Joined: Tue Oct 06, 2009 2:01 pm
- Location: Croatia
Re: Algobots Tournament 2011
@Bazinga
I was not talking about the maximum RPM at all, I was talking about pluralizing 'RPM' which is not necessary.
No 15 rpm for the wheels/transport device. Your weapon can go up to 100 rpm.
I was not talking about the maximum RPM at all, I was talking about pluralizing 'RPM' which is not necessary.
-
ImaPirate - Posts: 65
- Joined: Mon Oct 12, 2009 6:24 pm
Re: Algobots Tournament 2011
Ravenplucker wrote:Are you going to modify the OP?Bazinga wrote:Any density is welcomed. Just, don't make it airborne.
So I could make my bot 10,000,000,000 kg/m2 and that would be allowed by the rules?
If it works and if it wouldn't lag much :L
- Bazinga
- Posts: 25
- Joined: Sun Mar 13, 2011 10:14 am
Re: Algobots Tournament 2011
Ravenplucker wrote:What version of Algodoo will the competition be in?
What is the maximum weight limit?
Does the rpm limit apply to motors, or any rotating part of the robot?
To what extent may scripting be used?
Only as a way or getting the robot off the ground if it's been flipped, or other applications?
What are the slider limits for friction, restitution etc?
Are wheels the only allowed way of moving?Bazinga wrote:http://www.algodoo.com/algobox/details.php?id=56924
There's the template
There are two glitching cogwheels in the centre.
And you do realise the maximum allowed size of the robot takes up more than half of the arena, don't you?
Do everybody a favour, and actually plan your contests instead of blindly mashing your face against the keyboard.
Yes you know I can make the arena bigger or make your bot smaller? >_<
- Bazinga
- Posts: 25
- Joined: Sun Mar 13, 2011 10:14 am
32 posts • Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 39 guests