how to make a car with realistic weight?
3 posts • Page 1 of 1
how to make a car with realistic weight?
im trying to make my new car have realistic weight and i can get the weight right but when i try to make a suspension for it it always freaks out
i try to make really strong springs but it makes it seem like the springs have -2.000 damping
i also try to use lots of weaker springs but it does the same thing
how do i make good suspension for a realistic weight car?
i try to make really strong springs but it makes it seem like the springs have -2.000 damping
i also try to use lots of weaker springs but it does the same thing
how do i make good suspension for a realistic weight car?
Ουλές αποτελούν απόδειξη ότι το παρελθόν υπήρχε.
-
jakedmoon - Posts: 300
- Joined: Sat Jul 03, 2010 11:41 pm
- Location: earth
Re: how to make a car with realistic weight?
Maybe try using stretching hinges. They always return to correct position. And don't forget that spring strength depends on weight of objects it's attached to, so suspension parts should have significant weight compared to the car.
Phundamentalist
-
davidz40 - Posts: 438
- Joined: Sun Sep 06, 2009 10:30 am
Re: how to make a car with realistic weight?
One thing I sometimes do with suspension (especially piston suspension) is to increase the spring length and/or the strength. If you're worried about it looking good, make the working spring transparent and put a dummy spring over it.
Or you could just add multiples of the same spring on top of itself to make it stronger.
Or you could just add multiples of the same spring on top of itself to make it stronger.
-
TC42 - Posts: 984
- Joined: Sun Jan 09, 2011 1:53 pm
- Location: $ sudo apt get-install sandwich_
3 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests