How, exactly, do you use the webcam function?
11 posts • Page 1 of 1
How, exactly, do you use the webcam function?
I have been searching for a long time, but there seems to be no information on exactly how to use the camera function? There are no buttons in the bar, I've searched through all the menus and searched on the forum. I'm using Mac OS X Snow Leopard.
Thanks!
Thanks!
- isaacwaller
- Posts: 9
- Joined: Fri Dec 25, 2009 12:11 am
- Location: Canada
Re: How, exactly, do you use the webcam function?
Well, all I had to do was press the button and it worked. You just need to turn on your webcam(AFAIK, correct me if I'm wrong).
Millions of voices suddenly cried out in terror, and were suddenly silenced. Something terrible has happened.
-

RicH - [Funniest Person 2010]
- Posts: 2043
- Joined: Tue Sep 01, 2009 9:01 am
Re: How, exactly, do you use the webcam function?
first you have to turn on medium or advanced mode in the options menu

-

KarateBrot - Posts: 825
- Joined: Mon Aug 31, 2009 7:32 pm
- Location: Germany
Re: How, exactly, do you use the webcam function?
Have you guys not noticed his signature? Methinks I sense a spambot.
TheWinkits wrote:They both looks of cuking amazing
-

Chronos - [Most Active Member 2010]
- Posts: 4457
- Joined: Mon Aug 31, 2009 6:00 pm
- Location: Californania
Re: How, exactly, do you use the webcam function?
Doubt it Chronos.
-

Dadasas - Posts: 46
- Joined: Tue Sep 01, 2009 2:03 am
Re: How, exactly, do you use the webcam function?
I don't know what button you're talking about, if you could take a screenshot that would be nice. I already have advanced mode on.
- isaacwaller
- Posts: 9
- Joined: Fri Dec 25, 2009 12:11 am
- Location: Canada
Re: How, exactly, do you use the webcam function?
Turn on advanced mode, then look up at the bar and press the "Camera" button. It should be pretty straight-forward from there.
-

Laraso - Posts: 241
- Joined: Tue Sep 01, 2009 12:54 am
- Location: What are you, a stalker?
Re: How, exactly, do you use the webcam function?
I don't see any webcam button, see:
Thanks,
Thanks,
- isaacwaller
- Posts: 9
- Joined: Fri Dec 25, 2009 12:11 am
- Location: Canada
Re: How, exactly, do you use the webcam function?
Hrm, that probably means that your webcam is not being detected by Algodoo. Do you have an iSight webcam or some other?
Algodoo Developer
- Joel
- Posts: 104
- Joined: Mon Aug 31, 2009 11:03 am
Re: How, exactly, do you use the webcam function?
I've tried it with both my built in iSight, my Logitech QuickCam and my Logitech Orbit - all plugged in at the same time. I don't have access to anything but my iSight right now, and I don't see why it wouldn't work. While developing for Mac I do remember webcams being a tricky spot, so maybe webcam function is not available on Mac?
- isaacwaller
- Posts: 9
- Joined: Fri Dec 25, 2009 12:11 am
- Location: Canada
Re: How, exactly, do you use the webcam function?
You got it right. Different platforms unfortunately support different webcams. For Mac, I only think that iSight webcams are supported.
Algodoo Developer
- Joel
- Posts: 104
- Joined: Mon Aug 31, 2009 11:03 am
11 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 5 guests




