Page 2 of 2

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Thu Jun 30, 2011 4:28 pm
by Emanuel
Rideg wrote:http://imageshack.us/photo/my-images/9/algodoobeta1106300000.png/

You have to excuse me, I never got the hang of attaching a screenshot directly to the post.

Logfile:
Warning: Failed to serialize texture "texture";
Warning: Found crossing that went unfixed12;
Warning: BOM for UTF-16LE found in text expected to be UTF-812:22:06;
Warning: Missing Svenska translation for "various stuff".

Hmm, are you sure you are running 1.9.7 and did you install it to a new directory?
Have you tried resetting your config?
What graphics card are you running?

Gent wrote:Hinges TOTALY suck, what do they not want us to make engines or cars anymore?

We want you to be able to make better cars, but you are running a beta and we have reworked the solver quite a lot, some bugs are to be expected.

/ Emanuel

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Fri Jul 01, 2011 1:49 am
by Roast Beef
Was the ability to slow down/speed up the scene removed? It couldn't have been...
cannot find it for the life of me.

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Fri Jul 01, 2011 2:06 am
by Rideg
[quote="Emanuel"]Hmm, are you sure you are running 1.9.7 and did you install it to a new directory?[/quote]
You mean installing it without replacing 1.8.5?

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Fri Jul 01, 2011 7:47 am
by Emanuel
Roast Beef wrote:Was the ability to slow down/speed up the scene removed? It couldn't have been...
cannot find it for the life of me.

If you are talking about simulation speed, try holding you mouse over the play button for a second.
Pressing the play button also works (not space that is).

Rideg wrote:You mean installing it without replacing 1.8.5?

Precisely, and resetting you config.

/ Emanuel

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Fri Jul 01, 2011 3:40 pm
by Rideg
Nothing worked.

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Sun Jul 03, 2011 11:25 pm
by TC42
Any word on when a Linux version will be available?

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Mon Jul 04, 2011 8:29 am
by Emanuel
Rideg wrote:Nothing worked.

Could you please attach your whole Logfile.txt so that I can see if I find something suspicious?

/ Emanuel

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Mon Jul 04, 2011 8:32 am
by Emanuel
TC42 wrote:Any word on when a Linux version will be available?

Our Linux developer is unfortunately on vacation, so the Linux version will have to wait.

/ Emanuel

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Mon Jul 04, 2011 5:47 pm
by Nait
Like this beta, but algodoo still crashes when I try to use hinges/drag tool... What can cause this?

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Mon Jul 04, 2011 6:07 pm
by electronicboy
[quote="Emanuel"][quote="TC42"]Any word on when a Linux version will be available?[/quote]
Our Linux developer is unfortunately on vacation, so the Linux version will have to wait.

/ Emanuel[/quote]

How long has he been on vacation?
And when is he due back?

Also, could you tell him to read his [damn] messages

Ps, current algodoo deb wont install due to bad user IDs on the files....
Tar.gz version works fine!

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Wed Jul 06, 2011 12:50 am
by tatt61880
Thanks for adding changelog into this topic's first post. :thumbup:

Since v1.9.7b has been released, lots of bugs seems to be fixed.
Please release next beta for increasing our motivation. ;)

Regards,
Tatt

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Wed Jul 06, 2011 9:29 am
by byunghoon.cho
T O O L A G G Y ! ! !
So laggy that I just uninstalled it

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Wed Jul 06, 2011 7:03 pm
by electronicboy
*byunghoon.cho*
T O O L A G G Y ! ! !
So laggy that I just uninstalled it
*
I am going to premube you are a windows user...

Please try the 1.8.5 (on the downloads page) and tell me if that is also laggy.
Do you know your computers specs?

Also, could you please post the contets of
My documents/algodoo/logfile.txt

Also, could you please do this
1. Press start (and run if using XP) and type 'dxdiag' and press enter

2. Give the program a minute to load everything
(if a message about WHQL or something similar, click yes or no (your choise))

3. Click the button at the bottom of the screen, (save to file) and save the file...

4. Please paste a copy of the contents to this post

If you cant post the files, please send an email with the files attached,

Shane_af (at) yahoo .co .uk

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Wed Jul 06, 2011 8:21 pm
by TC42
Did you reset algodoo's config? It doesn't automatically reset when it installs (I think)... and if you installed it to the same directory as 1.8.5, you may get lag. If you're moving from phun to algodoo, algodoo may lag slightly more than phun, I think.

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Tue Jul 12, 2011 10:31 am
by mattias73
Are the force vectors not available/turned of in this beta-version, or am I just incompetent in finding them?

Cheers!
Mattias

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Tue Jul 12, 2011 10:44 am
by mattias73
Bug: Turning of "show momentum" or "show force" in the general settings, then turning it on for a specific object, then going back to the general settings for showing forces etc made the dialog window "flickr".

Using the mac-version.

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Fri Jul 15, 2011 12:05 am
by Rideg
So, my old computer crashed but I've got a new one now. Algodoo opens pretty slow and 'Load scenes' have the same issue. I think that the window that pops up when Algodoo opens with a text like"please wait ...while gravity is being created" shouldn't overlap everything as it blocks 1/5, 1/4 of the screen. Other than that, nothing to report.

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Fri Jul 15, 2011 7:19 am
by gloix
Hi there. Got some bugs to report:
- When I try to make a chain quickly and then run the simulation Algodoo crashes. This happens also when I'm making it with sim running.
- When I start the program, I notice it starts as maximized but it's not. I mean that it doesn't cover the hole screen, but when I try to maximize it, it just get smaller, then I try to maximize it and then it works.
- Algodoo also crashes when I liquify a considerable amount of matter.

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Fri Jul 15, 2011 10:27 pm
by electronicboy
1. There is a known bug with the new solver that causes chains to crash, this is going to be fixed/ has been fixed it in-house version
2. I also experience that problem.... lets hope for fix!
3. This is caused by too much strain on your cpu.. remember, the more objects (and water (a special kind of object)), the more work algodoo has to do.

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Sat Jul 16, 2011 6:48 am
by Chronos
Gloix, that's the same thing that happens to me, to the letter. And you, perchance, using an ATI/AMD graphics card?

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Tue Jul 19, 2011 7:58 am
by gloix
[quote="Chronos"]Gloix, that's the same thing that happens to me, to the letter. And you, perchance, using an ATI/AMD graphics card?[/quote]
Yes. Radeon HD6370

Re: Algodoo Open Beta 1.9.7 Released!

PostPosted: Tue Jul 19, 2011 8:54 pm
by Someone Else
I've found that with the maximized/not maximized bug, if you click outside the Algodoo window after the window appears but before Algodoo fully loads, it fixes itself for the session.