Mclaren P1 collab

Work together on Algodoo projects here.

Re: Mclaren P1 collab

Postby faytree » Fri Jul 31, 2015 5:30 pm

pnvv wrote:I usually assign layer j for gearboxes because I rarely ever use all of the remaining 9. That way I can be sure it won't collide with anything and get messed up :D

How about you post it with the engine and gearbox installed and then I'll build the wheels and motors and stuff around that?


Me & Pearl: we are doing it,y'know~
Image


Rating: rated 5
Filesize: 121.04 kB
Comments: 0
Ratings: 1
download
I'm back from the "dead"
User avatar
faytree
 
Posts: 942
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby pnvv » Fri Jul 31, 2015 5:42 pm

Why didn't you put it in the group for collabs? Oh well. I've found it flies at full throttle. I'll fix that right now :lol:
Image

(/)(°,,,°)(/)
User avatar
pnvv
 
Posts: 670
Joined: Tue Aug 26, 2014 11:46 pm
Location: Disunited States of America

Re: Mclaren P1 collab

Postby faytree » Fri Jul 31, 2015 5:47 pm

pnvv wrote:Why didn't you put it in the group for collabs? Oh well

Oops, srry! :O
It was like nearly 12 a.m over here :lol:

So, some of you might ask if I'm afraid Ghosts when I'm doing stuff during mid-night.
My answer is simple,
Ghost? What on earth is that? :lol:

v-tec is still kicking in,yo!
Image

Aaand still up:
1:15 AM
I'm back from the "dead"
User avatar
faytree
 
Posts: 942
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby pnvv » Fri Jul 31, 2015 7:29 pm

My clock is on LSD, it says it's 49:72 pm :lol: Stupid piece of Panasonic crap :lol: :lol:
Image

(/)(°,,,°)(/)
User avatar
pnvv
 
Posts: 670
Joined: Tue Aug 26, 2014 11:46 pm
Location: Disunited States of America

Re: Mclaren P1 collab

Postby faytree » Fri Jul 31, 2015 7:30 pm

While lying on my bed with my Dad's iPad, I was thinking...
Is it necessary to add an automatic spoiler to the car?

That's what I've been thinking... :?:
Last edited by faytree on Fri Jul 31, 2015 7:32 pm, edited 1 time in total.
I'm back from the "dead"
User avatar
faytree
 
Posts: 942
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby faytree » Fri Jul 31, 2015 7:31 pm

pnvv wrote:My clock is on LSD, it says it's 49:72 pm :lol: Stupid piece of Panasonic crap :lol: :lol:


Pfft.. BA HA! HA! HA! HA! HA! HA! :lol: :lol: :lol: :lol:
I'm back from the "dead"
User avatar
faytree
 
Posts: 942
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby pnvv » Fri Jul 31, 2015 7:38 pm

faytree wrote:While lying on my bed with my Dad's iPad, I was thinking...
Is it necessary to add an automatic spoiler to the car?

That's what I've been thinking... :?:

Aerodynamics suck in Algodoo so tilting it won't help, but maybe by increasing airfrictionmult...

Also, I've just finished up with the electric motors. It's going to have 1 per wheel, so 2. They're pretty weak at the moment but I'm going to improve them (hopefully).

Also, methinks they could be used as brakes too. You basically make the motor run backwards when braking so you slow down. Kind of like a dynamic brake that trains have.
Image

(/)(°,,,°)(/)
User avatar
pnvv
 
Posts: 670
Joined: Tue Aug 26, 2014 11:46 pm
Location: Disunited States of America

Re: Mclaren P1 collab

Postby faytree » Fri Jul 31, 2015 7:45 pm

pnvv wrote:Also, I've just finished up with the electric motors. It's going to have 1 per wheel, so 2. They're pretty weak at the moment but I'm going to improve them (hopefully).


Yess... Yess...
Well, I hope that It doesn't have weak torque since most electric cars like the Tesla Model S P85D on ludicrous mode. Its torque was so strong that it could defeat the 2007 Nissan GT-R R35 ( a.k.a the most overrated car in Car Throttle ) :lol:
I'm back from the "dead"
User avatar
faytree
 
Posts: 942
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby faytree » Fri Jul 31, 2015 7:54 pm

pnvv wrote:Also, methinks they could be used as brakes too. You basically make the motor run backwards when braking so you slow down. Kind of like a dynamic brake that trains have.


Hmm, I'm just a bit worried if it went wrong. Well, I'm planning to make it "battery" powered which can run out of power. It can be recharged when the car slows down.

*sniff-sniff*

I smelled thyme incoming...
Smelled that?
I'm back from the "dead"
User avatar
faytree
 
Posts: 942
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby pnvv » Fri Jul 31, 2015 8:57 pm

I made this basic cart to test the motors. It's 2 tons and they have enough starting torque that it doesn't need a gearbox. Of couurse, we won't need this much power in the actual car, because it has a 900 hp V8 to help push it along :lol:

Rating: rated 5
Filesize: 191.9 kB
Comments: 0
Ratings: 1
download
Image

(/)(°,,,°)(/)
User avatar
pnvv
 
Posts: 670
Joined: Tue Aug 26, 2014 11:46 pm
Location: Disunited States of America

Re: Mclaren P1 collab

Postby faytree » Sat Aug 01, 2015 2:10 am

pnvv wrote:I made this basic cart to test the motors. It's 2 tons and they have enough starting torque that it doesn't need a gearbox. Of couurse, we won't need this much power in the actual car, because it has a 900 hp V8 to help push it along :lol:

Rating: rated 5
Filesize: 191.9 kB
Comments: 0
Ratings: 1
download


Nice one! :thumbup:
I'm very impressed that it has a very strong torque.
By the way, I just woke up from my sleep :lol:

Well then, it's installing time 8-)
I'm back from the "dead"
User avatar
faytree
 
Posts: 942
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby faytree » Sat Aug 01, 2015 2:21 am

While installing it, here's a song that can pump up your adrenaline ;)
I'm back from the "dead"
User avatar
faytree
 
Posts: 942
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby pnvv » Sat Aug 01, 2015 2:24 am

I'm not installing it yet. That was just the beta for the motors. I'll install collision bearings and then post it, because legacymode = 0 axles are a pain in the ass to work with :)

Also, ye like y new sig, or is it too large...
Image

(/)(°,,,°)(/)
User avatar
pnvv
 
Posts: 670
Joined: Tue Aug 26, 2014 11:46 pm
Location: Disunited States of America

Re: Mclaren P1 collab

Postby faytree » Sat Aug 01, 2015 2:48 am

pnvv wrote:I'm not installing it yet. That was just the beta for the motors. I'll install collision bearings and then post it, because legacymode = 0 axles are a pain in the ass to work with :)

Also, ye like y new sig, or is it too large...


Looks nice :thumbup:
It kinda describes how's my 5 days with school :lol:
I'm back from the "dead"
User avatar
faytree
 
Posts: 942
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby faytree » Sat Aug 01, 2015 3:01 am

Well uh, the motor is outta control when I installed it into muh chassis. I need to remove the suspesion and fixate it just to make it stable :roll:

EDIT: ooh,wait! I've just figured it out :D!

http://i.imgur.com/759iu6m.png
Last edited by faytree on Sat Aug 01, 2015 3:12 am, edited 1 time in total.
I'm back from the "dead"
User avatar
faytree
 
Posts: 942
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby pnvv » Sat Aug 01, 2015 3:08 am

faytree wrote:Well uh, the motor is outta control when I installed it into muh chassis. I need to remove the suspesion and fixate it just to make it stable :roll:

I'm actually almost done with the updated version. I'm actually testing it with your chassis right now. I'd say it actually only needs one motor with 200 hp at the front wheel, and the spawn engine powers the rear. I think 1100hp is enough, as that's nudging small diesel locomotive territory :lol:

Also, the motor won't need a gearbox as it can spin stupidly fast.
Image

(/)(°,,,°)(/)
User avatar
pnvv
 
Posts: 670
Joined: Tue Aug 26, 2014 11:46 pm
Location: Disunited States of America

Re: Mclaren P1 collab

Postby faytree » Sat Aug 01, 2015 3:14 am

pnvv wrote:
faytree wrote:Well uh, the motor is outta control when I installed it into muh chassis. I need to remove the suspesion and fixate it just to make it stable :roll:

I'm actually almost done with the updated version. I'm actually testing it with your chassis right now. I'd say it actually only needs one motor with 200 hp at the front wheel, and the spawn engine powers the rear. I think 1100hp is enough, as that's nudging small diesel locomotive territory :lol:

Also, the motor won't need a gearbox as it can spin stupidly fast.


Oh course, it'll sound stupid to hear a gearboxed electric car :lol:

Hmm, it seems like I need to remove this since your updated motors is on the way :v

Image
I'm back from the "dead"
User avatar
faytree
 
Posts: 942
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby pnvv » Sat Aug 01, 2015 3:30 am

Yup, they're here.

Rating: rated 5
Filesize: 87.5 kB
Comments: 3
Ratings: 1
download


I used a dyno borrowed from another user (I'm working on that with him too) and it tops out at around 240 HP max at 400 RPM. It runs backward in this scene (the dyno didn't like it running the other way) so just mirror the whole motor to get it to run the right way. I think 1 at the front wheel should do it. What, 1140hp not enough? :lol:
Image

(/)(°,,,°)(/)
User avatar
pnvv
 
Posts: 670
Joined: Tue Aug 26, 2014 11:46 pm
Location: Disunited States of America

Re: Mclaren P1 collab

Postby faytree » Sat Aug 01, 2015 3:33 am

pnvv wrote:Yup, they're here.

Rating: rated 5
Filesize: 87.5 kB
Comments: 3
Ratings: 1
download


I used a dyno borrowed from another user (I'm working on that with him too) and it tops out at around 240 HP max at 400 RPM. It runs backward in this scene (the dyno didn't like it running the other way) so just mirror the whole motor to get it to run the right way. I think 1 at the front wheel should do it. What, 1140hp not enough? :lol:


The Dyno looks very.. advanced. 2Advanced4Me

Nice, since I've figured out what's the main reason why the motor went overpowered when I installed it into a suspended chassis, it's installing time 8-)

w8 4 me,m9.
I'm back from the "dead"
User avatar
faytree
 
Posts: 942
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby pnvv » Sat Aug 01, 2015 4:03 am

Kids, don't play with attraction.
Image

On second thought... maybe a C-Engine would be a better idea.
Image

(/)(°,,,°)(/)
User avatar
pnvv
 
Posts: 670
Joined: Tue Aug 26, 2014 11:46 pm
Location: Disunited States of America

Re: Mclaren P1 collab

Postby faytree » Sat Aug 01, 2015 4:18 am

pnvv wrote:Kids, don't play with attraction.
Image

On second thought... maybe a C-Engine would be a better idea.


This is why kids, we cannot smoke marijuana :lol:
I'm back from the "dead"
User avatar
faytree
 
Posts: 942
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby faytree » Sat Aug 01, 2015 4:22 am

Worry no more,pnvv! I've just made a new suspension for the motor. It's proven that it can deal with overpowered motors ;)

Image
I'm back from the "dead"
User avatar
faytree
 
Posts: 942
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby faytree » Sat Aug 01, 2015 5:25 am

le me working with the e-mode engagement system... Pearl nearly gave up with this thing but thankfully Shia Labeouf motivated her and told her not to give up. Gosh,I've never seen Pearl nearly gave up like that.
Safe to say that I have a very wild imagination. Everytime when school is over, I ran like a racing car and everyone around me are my oppnents

Image

Image
I'm back from the "dead"
User avatar
faytree
 
Posts: 942
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby faytree » Sat Aug 01, 2015 2:00 pm

*pants heavily*
Maybe that'll be enough for today :mrgreen:

Image
I'm back from the "dead"
User avatar
faytree
 
Posts: 942
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby pnvv » Sat Aug 01, 2015 3:47 pm

Holy crap! I checked the motor, and ye glued the whole thing hopelessly together!! Why've ye done that... :lol:

Don't worry, I think I mostly fixed it by now.
Image

(/)(°,,,°)(/)
User avatar
pnvv
 
Posts: 670
Joined: Tue Aug 26, 2014 11:46 pm
Location: Disunited States of America

PreviousNext

Return to Collab forum

Who is online

Users browsing this forum: No registered users and 1 guest