Mclaren P1 collab

Work together on Algodoo projects here.

Mclaren P1 collab

Postby faytree » Thu Jul 30, 2015 4:20 am

COMPLETED! THANK YOU FOR JOINING THIS COLLAB! :thumbup:


Image






Image

Welcome to the Mclaren P1 collaboration thread! :)
Well, keep in mind that this is my first collaboration thread.

Our aim is to invent the ultimate machine powered by a V8 engine and electric motors. or as the title says, the Mclaren P1!

We are looking for a powerful V8 engine, a nice yet "eco-friendly" electric( c-engine or magnetic powered ) motors , a driver, and a wheelmaker. All combined together and make the legendary Mclaren P1 a.k.a "The Widowmaker"

Now we are looking for people who can help with:

  • The bodywork completed ( In charge - Me (bodywork is over here)
  • The engine ( Must be a spawn V8 engine and runs @ 120hz of frequency ( it will be great if it packs 903 hp or more ) ;) ) completed ( In charge - pnvv )
  • The wheels (rims) completed ( In charge - Me )
  • The Gearbox ( 7 speed manual ) completed ( In charge - pnvv )
  • The Driver ( In charge - pnvv )
  • The electric motors ( must run in either C-engine or Magnetic motors ) completed ( In charge - pnvv )
  • Speedometer and Tachometer completed ( In charge - [ Me ] )
  • Chassis completed ( In charge - Me )


[b]I hope that we could collaborate together smoothly so we can make this monster a reality(in Algodoo) :)
Last edited by faytree on Wed Mar 16, 2016 9:25 am, edited 20 times in total.
I'm back from the "dead"
User avatar
faytree
 
Posts: 941
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby electronicboy » Thu Jul 30, 2015 4:39 am

:thumbup: on picking the most horrendous font colors in a post I've seen in a short while :(
When asking for help, READ THE STICKIES!
electronicboy
 
Posts: 1693
Joined: Mon Aug 31, 2009 6:18 pm

Re: Mclaren P1 collab

Postby faytree » Thu Jul 30, 2015 4:58 am

electronicboy wrote::thumbup: on picking the most horrendous font colors in a post I've seen in a short while :(

Just fixed the font colors, thanks for letting me know ;)
I'm back from the "dead"
User avatar
faytree
 
Posts: 941
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby pnvv » Thu Jul 30, 2015 5:47 pm

lol I could probably do most of everything. But I'll take the gearbox and engine, because I already have a V8 available that can be boosted like hell to 1250hp :lol: and I'm pretty good at gearboxes.
Image

(/)(°,,,°)(/)
User avatar
pnvv
 
Posts: 670
Joined: Tue Aug 26, 2014 11:46 pm
Location: Disunited States of America

Re: Mclaren P1 collab

Postby faytree » Thu Jul 30, 2015 6:15 pm

pnvv wrote:lol I could probably do most of everything. But I'll take the gearbox and engine, because I already have a V8 available that can be boosted like hell to 1250hp :lol: and I'm pretty good at gearboxes.

Thanks for taking part,pnvv! :D
Well, 903hp is enough since we want to make it as realistic as possible ;)
I'm back from the "dead"
User avatar
faytree
 
Posts: 941
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby pnvv » Thu Jul 30, 2015 7:53 pm

OK, Good! Could I do the dummy too? You know how I do mechanical cars, with the acceleration and braking and usually gears too controlled by the driver's body?
Image

(/)(°,,,°)(/)
User avatar
pnvv
 
Posts: 670
Joined: Tue Aug 26, 2014 11:46 pm
Location: Disunited States of America

Re: Mclaren P1 collab

Postby pnvv » Thu Jul 30, 2015 8:37 pm

Got the engine & gearbox done 8-)

Rating: rated 5.6
Filesize: 76.38 kB
Comments: 4
Ratings: 2
download
Image

(/)(°,,,°)(/)
User avatar
pnvv
 
Posts: 670
Joined: Tue Aug 26, 2014 11:46 pm
Location: Disunited States of America

Re: Mclaren P1 collab

Postby faytree » Fri Jul 31, 2015 12:38 am

pnvv wrote:OK, Good! Could I do the dummy too? You know how I do mechanical cars, with the acceleration and braking and usually gears too controlled by the driver's body?

Of course,you can :)
Last edited by faytree on Fri Jul 31, 2015 12:40 am, edited 1 time in total.
I'm back from the "dead"
User avatar
faytree
 
Posts: 941
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby faytree » Fri Jul 31, 2015 12:40 am

pnvv wrote:Got the engine & gearbox done 8-)

Rating: rated 5.6
Filesize: 76.38 kB
Comments: 4
Ratings: 2
download

Thanks,pnvv! Now the engine and the gearbox category is competed! ;)
I'm back from the "dead"
User avatar
faytree
 
Posts: 941
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby pnvv » Fri Jul 31, 2015 12:44 am

Ok, good. You should put a little think that says like "completed" or something for the engine and gearbox.

Also, did you sleep at ALL last night? Google says it's 6:44 am right now in your part of the world :lol:
Image

(/)(°,,,°)(/)
User avatar
pnvv
 
Posts: 670
Joined: Tue Aug 26, 2014 11:46 pm
Location: Disunited States of America

Re: Mclaren P1 collab

Postby faytree » Fri Jul 31, 2015 12:46 am

pnvv wrote:Ok, good. You should put a little think that says like "completed" or something for the engine and gearbox.

Also, did you sleep at ALL last night? Google says it's 6:44 am right now in your part of the world :lol:

Yes,I do go to sleep at 12:30 a.m last night and woke up at 5:33 a.m :P
Btw,Look at mah signature, it says 'one does not simply go to sleep' :lol:
I'm back from the "dead"
User avatar
faytree
 
Posts: 941
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby pnvv » Fri Jul 31, 2015 1:45 am

By the way, what's a C-Engine? Never heard of it, example maybe?
Image

(/)(°,,,°)(/)
User avatar
pnvv
 
Posts: 670
Joined: Tue Aug 26, 2014 11:46 pm
Location: Disunited States of America

Re: Mclaren P1 collab

Postby faytree » Fri Jul 31, 2015 1:59 am

pnvv wrote:By the way, what's a C-Engine? Never heard of it, example maybe?


C - engine is somekind of a collision engine. Kilinich made that once and installed it into his baja.
Like this one(Kilinich's C-Engine):
Rating: rated 7.5
Filesize: 59.89 kB
Comments: 10
Ratings: 8
download
I'm back from the "dead"
User avatar
faytree
 
Posts: 941
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby pnvv » Fri Jul 31, 2015 3:33 am

I think it would be more fitting to use a magnet motor if ya ask me. I'm good at those too :)
Image

(/)(°,,,°)(/)
User avatar
pnvv
 
Posts: 670
Joined: Tue Aug 26, 2014 11:46 pm
Location: Disunited States of America

Re: Mclaren P1 collab

Postby faytree » Fri Jul 31, 2015 4:16 am

pnvv wrote:I think it would be more fitting to use a magnet motor if ya ask me. I'm good at those too :)


Great idea! :thumbup:
Well, if you want to.. you can take part of the motor too!

...I'm just worried if when the magnetic motors are overpowered making the car flying away :?

If you're building a magnetic motor, make sure that the collision layers of the motors are different than collision layers used by the engine, gearbox and bodywork to prevent the car from screwing up
I'm back from the "dead"
User avatar
faytree
 
Posts: 941
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby faytree » Fri Jul 31, 2015 3:44 pm

Just done doing some improvements to the bodywork! :)
Yes, you might know why there are some distortions on the image like weird looking Windows start logo, malformed looking grid GUI button and moar. It's because that I resized it with ms.Paint :lol:

y u do dis,ms.Paint

Image



Oh and uuuh, I was checking out your engine and then I found this...
It's not even moving at all and it still packs a lot of energy there....

Image
My reaction...
I'm back from the "dead"
User avatar
faytree
 
Posts: 941
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby pnvv » Fri Jul 31, 2015 4:12 pm

Forgot to say, don't make the body collision group A, or it will collide with the engine! :|
Image

(/)(°,,,°)(/)
User avatar
pnvv
 
Posts: 670
Joined: Tue Aug 26, 2014 11:46 pm
Location: Disunited States of America

Re: Mclaren P1 collab

Postby faytree » Fri Jul 31, 2015 4:17 pm

pnvv wrote:Forgot to say, don't make the body collision group A, or it will collide with the engine! :|


Thanks for the advice :thumbup:
Oh, and here's a suggestion for you ( it's in the picture ).
And thankfully that your engine and your gearbox miraculously fits in the bodywork so well that I don't need to resize it! :D

EDIT: DON'T USE THE "J" COLLISION LAYER TOO! I JUST REALIZED THAT THE GEARBOX RUNS IN J COLLISION LAYERDON'T use the "F" collision layer for the electric motor, I'll be using that layer for the bodywork!
Image
Last edited by faytree on Fri Jul 31, 2015 5:15 pm, edited 1 time in total.
I'm back from the "dead"
User avatar
faytree
 
Posts: 941
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby pnvv » Fri Jul 31, 2015 4:47 pm

It fits because I designed it to. Normally I mount the gearbox away from the engine, but I had no room, so I just attached the gearbox to the engine to save space :thumbup:

While I make the motors I might as well make the wheels too. I might not get done with them till later though because I have crap I need to do :o

About that weird energy thing, it's because of the upgrades i did. I just shoved Chuck Norris into the engine and that gave 2x performance :lol:
Image

(/)(°,,,°)(/)
User avatar
pnvv
 
Posts: 670
Joined: Tue Aug 26, 2014 11:46 pm
Location: Disunited States of America

Re: Mclaren P1 collab

Postby faytree » Fri Jul 31, 2015 4:49 pm

Comment deleted to prevent huge pictures and spams
Last edited by faytree on Fri Jul 31, 2015 5:17 pm, edited 3 times in total.
I'm back from the "dead"
User avatar
faytree
 
Posts: 941
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby faytree » Fri Jul 31, 2015 4:52 pm

pnvv wrote:About that weird energy thing, it's because of the upgrades i did. I just shoved Chuck Norris into the engine and that gave 2x performance :lol:


both Jeremy Clarkson and Chuck Norris approved this :lol: :

Image

Image
I'm back from the "dead"
User avatar
faytree
 
Posts: 941
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby faytree » Fri Jul 31, 2015 5:00 pm

Speaking of that,I'll be in charge with the chassis.

Chassis is love,
Chassis is life
.

Oh pnvv, please take note that only collision layer H and I are the only collision layers that can be used for the motors. I just realized that collision layer "J" is used for the gearbox :(
Last edited by faytree on Fri Jul 31, 2015 5:19 pm, edited 1 time in total.
I'm back from the "dead"
User avatar
faytree
 
Posts: 941
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby pnvv » Fri Jul 31, 2015 5:18 pm

I hope I can get the motors and wheels and dummy and stuff done by tomorrow.

Here's my agenda for tonight...

Image
Image

(/)(°,,,°)(/)
User avatar
pnvv
 
Posts: 670
Joined: Tue Aug 26, 2014 11:46 pm
Location: Disunited States of America

Re: Mclaren P1 collab

Postby faytree » Fri Jul 31, 2015 5:20 pm

pnvv wrote:I hope I can get the motors and wheels and dummy and stuff done by tomorrow.

Here's my agenda for tonight...

Image


pnvv, pls.

Yes, I'm sort of a paranoid person,to be honest with ya :lol:

I'm writing this twice just to make suuure that you've read it....
"please take note that only collision layer H and I are the only collision layers that can be used for the motors. I just realized that collision layer "J" is used for the gearbox :( "
I'm back from the "dead"
User avatar
faytree
 
Posts: 941
Joined: Mon Nov 05, 2012 1:37 pm
Location: uhhh Jakku

Re: Mclaren P1 collab

Postby pnvv » Fri Jul 31, 2015 5:27 pm

I usually assign layer j for gearboxes because I rarely ever use all of the remaining 9. That way I can be sure it won't collide with anything and get messed up :D

How about you post it with the engine and gearbox installed and then I'll build the wheels and motors and stuff around that?
Image

(/)(°,,,°)(/)
User avatar
pnvv
 
Posts: 670
Joined: Tue Aug 26, 2014 11:46 pm
Location: Disunited States of America

Next

Return to Collab forum

Who is online

Users browsing this forum: No registered users and 1 guest