[Work In Progress] Mercedes - AMG ONE
8 posts • Page 1 of 1
[Work In Progress] Mercedes - AMG ONE
I've always been a fan of this car back before I haven't seen it yet (via teasers, etc). And it has been a pleasure for me to reach this far in developing this car with the help of The Linkage.
So far, I only have myself done with the engine. Goes for around 590-650hp at around 11,000 rpm. The fastest engine I've ever made with some other interesting features added to it in order for it to reach a speed that high, again with The Linkage's help.
I honestly can't wait to finish this thing before I have to go to college later next month.
So far, I only have myself done with the engine. Goes for around 590-650hp at around 11,000 rpm. The fastest engine I've ever made with some other interesting features added to it in order for it to reach a speed that high, again with The Linkage's help.
I honestly can't wait to finish this thing before I have to go to college later next month.
waiting for semester break to come...
-
faytree - Posts: 947
- Joined: Mon Nov 05, 2012 1:37 pm
- Location: Selangor, Malaysia
Re: [Work In Progress] Mercedes - AMG ONE
Cool! How will it work?
Hello my name is Kenlimepie. I'm an Algodoo Enthusiast, and Marble Racer. I run a Youtube channel which is about Algodoo Marble Racing, but I am not afraid to design new ideas in this program. https://www.youtube.com/c/kenlimepie
- Ken3344
- Posts: 53
- Joined: Mon Sep 05, 2016 8:44 pm
Re: [Work In Progress] Mercedes - AMG ONE
Ken3344 wrote:Cool! How will it work?
Well, probably like how most of my cars work including a standalone EV mode. Not sure if I want to add fuel to this car just yet.
First thing's first, I have to figure out how to make 3 (originally 4, where 2 of them control each front wheel but I fused them as one because this is in 2D) attraction motors work in harmony without destroying each other first...
waiting for semester break to come...
-
faytree - Posts: 947
- Joined: Mon Nov 05, 2012 1:37 pm
- Location: Selangor, Malaysia
Re: [Work In Progress] Mercedes - AMG ONE
scrapped the attraction motors, and I replaced it with normal motors.
What you see is basically the entirety of the car's powertrain, clocking up to over 1,200hp (may consider fusing those 2 motors at the right corner as one). Adding from the instant torque supplied by those motors, I'm assuming that this thing could have some of the most insane acceleration
What you see is basically the entirety of the car's powertrain, clocking up to over 1,200hp (may consider fusing those 2 motors at the right corner as one). Adding from the instant torque supplied by those motors, I'm assuming that this thing could have some of the most insane acceleration
waiting for semester break to come...
-
faytree - Posts: 947
- Joined: Mon Nov 05, 2012 1:37 pm
- Location: Selangor, Malaysia
Re: [Work In Progress] Mercedes - AMG ONE
How's progress?
Hello my name is Kenlimepie. I'm an Algodoo Enthusiast, and Marble Racer. I run a Youtube channel which is about Algodoo Marble Racing, but I am not afraid to design new ideas in this program. https://www.youtube.com/c/kenlimepie
- Ken3344
- Posts: 53
- Joined: Mon Sep 05, 2016 8:44 pm
Re: [Work In Progress] Mercedes - AMG ONE
Ken3344 wrote:How's progress?
It's doing pretty alright. I might need to double check the powertrain, the gearbox is ready (I just need to make the shifter).
I may re-use some parts I used on my old Supra, mainly the chassis (it was meant to be modular anyway) to save time.
I'll probably continue developing this car in the next few weeks
waiting for semester break to come...
-
faytree - Posts: 947
- Joined: Mon Nov 05, 2012 1:37 pm
- Location: Selangor, Malaysia
Re: [Work In Progress] Mercedes - AMG ONE
waiting for semester break to come...
-
faytree - Posts: 947
- Joined: Mon Nov 05, 2012 1:37 pm
- Location: Selangor, Malaysia
Re: [Work In Progress] Mercedes - AMG ONE
I barely have any desire left to finish it, the car's powertrain and stuff are ready. Its performance has been proven months ago and only improved recently, here are the stats:|
0-62mph (0-100km/h): ~1.9 seconds
0-217mph (0-350km/h): ~10.0-10.5 seconds
top speed: >370km/h (~230mph) 385km/h (~239.228mph) when the frontal hybrid motor is disengaged
total mass: ~1300kg
maximum power: ~ at least 1560bhp
maximum torque: ~2144Nm
0-62mph (0-100km/h): ~1.9 seconds
0-217mph (0-350km/h): ~10.0-10.5 seconds
top speed: >370km/h (~230mph) 385km/h (~239.228mph) when the frontal hybrid motor is disengaged
total mass: ~1300kg
maximum power: ~ at least 1560bhp
maximum torque: ~2144Nm
waiting for semester break to come...
-
faytree - Posts: 947
- Joined: Mon Nov 05, 2012 1:37 pm
- Location: Selangor, Malaysia
8 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 7 guests