how to make a rotary collide eng.
8 posts • Page 1 of 1
how to make a rotary collide eng.
after one million failed atemps at a throtelled rotary engine I decided to ask for help so.. how to make a good throttled rotary collision engine (mine has unstable rad/s and works badly) please help
- Attachments
-
- rotary eng [help].phz
- (58.96 KiB) Downloaded 171 times
Last edited by hecta on Mon Feb 20, 2012 1:54 am, edited 3 times in total.
- hecta
- Posts: 21
- Joined: Thu Feb 02, 2012 3:39 am
Re: how to make a rotary collide eng.
Start by making a very simple collison engine, then change it to have a throttle. (The throttle just changes the ignition timing, basicly by rotating the "spark plugs" so the collisons last for longer (Faster rpm) and shorter (For idle).
-
Nxdt - Posts: 1019
- Joined: Mon Aug 31, 2009 6:32 pm
- Location: Scotland!
Re: how to make a rotary collide eng.
o.k so i did that but why does it explode when I grab it or when i lower the throtle whit down arrow ?
- hecta
- Posts: 21
- Joined: Thu Feb 02, 2012 3:39 am
Re: how to make a rotary collide eng.
I added an atachment at the top
- hecta
- Posts: 21
- Joined: Thu Feb 02, 2012 3:39 am
Re: how to make a rotary collide eng.
it explodes when you throttle down because the red circles don't turn green (and thus change collision layer) before they re-intersect the red box
try reducing the size of the red box to half, and see what you get
try reducing the size of the red box to half, and see what you get
- jon_joy_1999
- Posts: 233
- Joined: Fri Dec 09, 2011 12:51 am
Re: how to make a rotary collide eng.
thanks works ! it goes from 4 rad/s to 22 !
- hecta
- Posts: 21
- Joined: Thu Feb 02, 2012 3:39 am
Re: how to make a rotary collide eng.
sweet, glad we could help
- jon_joy_1999
- Posts: 233
- Joined: Fri Dec 09, 2011 12:51 am
8 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 11 guests