Grid size doesn't agree with 1 meter indicator
4 posts • Page 1 of 1
Grid size doesn't agree with 1 meter indicator
I created boxes that were 1 meter by 1 meter. But they are about 80%? the size of the 1 meter indicator at the bottom right of the screen. Why is that? Thanks for your help. Newbie Dave
- suncitydave
- Posts: 3
- Joined: Sat Dec 08, 2018 12:00 pm
Re: Grid size doesn't agree with 1 meter indicator
I'm not sure if I follow, can you show a picture to follow up? Thanks.
Hello my name is Kenlimepie. I'm an Algodoo Enthusiast, and Marble Racer. I run a Youtube channel which is about Algodoo Marble Racing, but I am not afraid to design new ideas in this program. https://www.youtube.com/c/kenlimepie
- Ken3344
- Posts: 53
- Joined: Mon Sep 05, 2016 8:44 pm
Re: Grid size doesn't agree with 1 meter indicator
Ken, I couldn't figure out how to get an image into this response so I created a webpage at http://www.suncitydave.org/algodoo.htm for you with the image. The upper box was drawn free hand. The lower box used the grid facility. Note that they do not agree with the 1 meter length indicator bar.
AND What is the program of choice by Algodoo users to get an Algodoo scene into a video format like, for example, a .wav file?
Thanks very much for your help, Dave
AND What is the program of choice by Algodoo users to get an Algodoo scene into a video format like, for example, a .wav file?
Thanks very much for your help, Dave
- suncitydave
- Posts: 3
- Joined: Sat Dec 08, 2018 12:00 pm
Re: Grid size doesn't agree with 1 meter indicator
Right click the Grid icon at the bottom of the scene. There you should find a slider labeled "Number of segments" or similar. Make sure it is set to 2, otherwise the distance between 2 grid lines will not equal the indicator length.
- FRA32
- Posts: 229
- Joined: Wed Dec 03, 2014 9:51 pm
4 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests