Algodoo

by **Someone Else** » Tue Jul 19, 2011 8:54 pm

I've found that with the maximized/not maximized bug, if you click outside the Algodoo window after the window appears but before Algodoo fully loads, it fixes itself for the session.

by **gloix** » Tue Jul 19, 2011 7:58 am

[quote="Chronos"]Gloix, that's the same thing that happens to me, to the letter. And you, perchance, using an ATI/AMD graphics card?[/quote]
Yes. Radeon HD6370

by **Chronos** » Sat Jul 16, 2011 6:48 am

Gloix, that's the same thing that happens to me, to the letter. And you, perchance, using an ATI/AMD graphics card?

by **electronicboy** » Fri Jul 15, 2011 10:27 pm

1. There is a known bug with the new solver that causes chains to crash, this is going to be fixed/ has been fixed it in-house version
2. I also experience that problem.... lets hope for fix!
3. This is caused by too much strain on your cpu.. remember, the more objects (and water (a special kind of object)), the more work algodoo has to do.

by **gloix** » Fri Jul 15, 2011 7:19 am

Hi there. Got some bugs to report:
- When I try to make a chain quickly and then run the simulation Algodoo crashes. This happens also when I'm making it with sim running.
- When I start the program, I notice it starts as maximized but it's not. I mean that it doesn't cover the hole screen, but when I try to maximize it, it just get smaller, then I try to maximize it and then it works.
- Algodoo also crashes when I liquify a considerable amount of matter.

by **Rideg** » Fri Jul 15, 2011 12:05 am

So, my old computer crashed but I've got a new one now. Algodoo opens pretty slow and 'Load scenes' have the same issue. I think that the window that pops up when Algodoo opens with a text like"please wait ...while gravity is being created" shouldn't overlap everything as it blocks 1/5, 1/4 of the screen. Other than that, nothing to report.

by **mattias73** » Tue Jul 12, 2011 10:44 am

Bug: Turning of "show momentum" or "show force" in the general settings, then turning it on for a specific object, then going back to the general settings for showing forces etc made the dialog window "flickr".

Using the mac-version.

by **mattias73** » Tue Jul 12, 2011 10:31 am

Are the force vectors not available/turned of in this beta-version, or am I just incompetent in finding them?

Cheers!
Mattias

by **TC42** » Wed Jul 06, 2011 8:21 pm

Did you reset algodoo's config? It doesn't automatically reset when it installs (I think)... and if you installed it to the same directory as 1.8.5, you may get lag. If you're moving from phun to algodoo, algodoo may lag slightly more than phun, I think.

by **electronicboy** » Wed Jul 06, 2011 7:03 pm

*byunghoon.cho*
T O O L A G G Y ! ! !
So laggy that I just uninstalled it
*
I am going to premube you are a windows user...

Please try the 1.8.5 (on the downloads page) and tell me if that is also laggy.
Do you know your computers specs?

Also, could you please post the contets of
My documents/algodoo/logfile.txt

Also, could you please do this
1. Press start (and run if using XP) and type 'dxdiag' and press enter

2. Give the program a minute to load everything
(if a message about WHQL or something similar, click yes or no (your choise))

3. Click the button at the bottom of the screen, (save to file) and save the file...

4. Please paste a copy of the contents to this post

If you cant post the files, please send an email with the files attached,

Shane_af (at) yahoo .co .uk

by **byunghoon.cho** » Wed Jul 06, 2011 9:29 am

T O O L A G G Y ! ! !
So laggy that I just uninstalled it

by **tatt61880** » Wed Jul 06, 2011 12:50 am

Thanks for adding changelog into this topic's first post. :thumbup:

Since v1.9.7b has been released, lots of bugs seems to be fixed.
Please release next beta for increasing our motivation.

Regards,
Tatt

by **electronicboy** » Mon Jul 04, 2011 6:07 pm

[quote="Emanuel"][quote="TC42"]Any word on when a Linux version will be available?[/quote]
Our Linux developer is unfortunately on vacation, so the Linux version will have to wait.

/ Emanuel[/quote]

How long has he been on vacation?
And when is he due back?

Also, could you tell him to read his [damn] messages

Ps, current algodoo deb wont install due to bad user IDs on the files....
Tar.gz version works fine!

by **Nait** » Mon Jul 04, 2011 5:47 pm

Like this beta, but algodoo still crashes when I try to use hinges/drag tool... What can cause this?

by **Emanuel** » Mon Jul 04, 2011 8:32 am

TC42 wrote:Any word on when a Linux version will be available?

Our Linux developer is unfortunately on vacation, so the Linux version will have to wait.

/ Emanuel

by **Emanuel** » Mon Jul 04, 2011 8:29 am

Rideg wrote:Nothing worked.

Could you please attach your whole Logfile.txt so that I can see if I find something suspicious?

/ Emanuel

by **TC42** » Sun Jul 03, 2011 11:25 pm

Any word on when a Linux version will be available?

by **Rideg** » Fri Jul 01, 2011 3:40 pm

Nothing worked.

by **Emanuel** » Fri Jul 01, 2011 7:47 am

Roast Beef wrote:Was the ability to slow down/speed up the scene removed? It couldn't have been...
cannot find it for the life of me.

If you are talking about simulation speed, try holding you mouse over the play button for a second.
Pressing the play button also works (not space that is).

Rideg wrote:You mean installing it without replacing 1.8.5?

Precisely, and resetting you config.

/ Emanuel

by **Rideg** » Fri Jul 01, 2011 2:06 am

[quote="Emanuel"]Hmm, are you sure you are running 1.9.7 and did you install it to a new directory?[/quote]
You mean installing it without replacing 1.8.5?

by **Roast Beef** » Fri Jul 01, 2011 1:49 am

Was the ability to slow down/speed up the scene removed? It couldn't have been...
cannot find it for the life of me.

by **Emanuel** » Thu Jun 30, 2011 4:28 pm

Rideg wrote:http://imageshack.us/photo/my-images/9/algodoobeta1106300000.png/

You have to excuse me, I never got the hang of attaching a screenshot directly to the post.

Logfile:
Warning: Failed to serialize texture "texture";
Warning: Found crossing that went unfixed12;
Warning: BOM for UTF-16LE found in text expected to be UTF-812:22:06;
Warning: Missing Svenska translation for "various stuff".

Hmm, are you sure you are running 1.9.7 and did you install it to a new directory?
Have you tried resetting your config?
What graphics card are you running?

Gent wrote:Hinges TOTALY suck, what do they not want us to make engines or cars anymore?

We want you to be able to make better cars, but you are running a beta and we have reworked the solver quite a lot, some bugs are to be expected.

/ Emanuel

by **Gent** » Thu Jun 30, 2011 2:50 pm

Hinges TOTALY suck, what do they not want us to make engines or cars anymore?

by **Rideg** » Thu Jun 30, 2011 12:37 pm

http://imageshack.us/photo/my-images/9/ ... 00000.png/

You have to excuse me, I never got the hang of attaching a screenshot directly to the post.

Logfile:
Warning: Failed to serialize texture "texture";
Warning: Found crossing that went unfixed12;
Warning: BOM for UTF-16LE found in text expected to be UTF-812:22:06;
Warning: Missing Svenska translation for "various stuff".

by **Emanuel** » Thu Jun 30, 2011 10:05 am

Rideg wrote:Tracers, GUI is made out of rectangles. How would I go around to fix this?

Could you please attach a screenshot of the GUI and does your Logfile.txt give any warning or error?

/ Emanuel

Algodoo

www.algodoo.com

Algodoo Open Beta 1.9.7 Released!

Post a reply

Expand view Topic review: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!

Re: Algodoo Open Beta 1.9.7 Released!