Algodoo

120RPM motor with 6 speed transmission, you will only get to 3rd maybe 4th gear on this track because you will need to be in 1st gear in the dump site.

Use caution upon exit of the crusher, load jostling from excessive acceleration will cause loss of load upon exit, to ensure that power is only put on for the right times use [d] to engage/disengage drive to the rear.

SHIFTING: **Wait for the current gear to stop accelerating before changing gear** Ensure that all gears (and drive[d]) are disengaged before launch, also, ensure that you do not reengage the wrong gear at speed or it may "rock" out of place or "pull through" you will find out what i mean. Step 1: press [1] on the top of your keyboard to put it in gear. Step 2: Engage [d] Drive to lock up the rear-end. Step 3: After 1st has reached its maximum output press [1] and [2] at the same time to shift to 2nd. Step 3: Once 2nd has reached maximum output press [2] and [3] at the same time to shift into 3rd, after 2nd gear they are all the same just hit 3 and 4 then 4 and 5 and so on as you like but be warned, you will likely only reach 4th because you wont be able to slow the vehicle to drive into the dump