Algodoo

A grind stone for your swords, axes, whatever you want to use it on. Gets spinning at around 80 - 110 rad/s when you start stepping on the pedal pretty quickly.

Instructions:

1. Start off by selecting the drag tool, and grabbing the pedal
2. Pull the pedal down until it won't go any further
3. Let the pedal go up on its own, or drag it upwards until it won't go further


Uses readables to make the ratchet that's in there, so of course you can only use algodoo 2.0.0 and newer. Might break where the pedal pulls on the gear if you pull on the pedal too quickly, so be careful.

Runs best at sim frequency 200, so if it's not working try tapping F10 and typing in "Sim.Frequency = 200", without the quotes. The default frequency is 100, so to set it back to normal type in the same thing, but make it 100 instead of 200.

Updates V1.1:

Made the grind stone create sparks when you place something on it. The sparks fade away and dissapear after a short time.

Made a blade simulator that, when enter/return is held, lowers onto the grindstone.

Got rid of the pedal limiters, because the pedal was breaking through them, and then they just kept the pedal from moving at all.

Probably not good that the sparks shoot the person that's sharpening the tool in the face, but it's the only way it'd work without totally overhauling it to make it spin the other way.