At 1000 Hz and with exactly 2700 particles (only 21 Kg of fluid), these pumps can lift up to 2400 kg. But i do not really recommend increasing the frequency beyond 500 Hz due to extreme lag.
No thyme has ever been used! It is all pure liquid-power! And it lifts 2400KG, this is probably the only scene on algobox capable of lifting such weight with just liquid pressure.
This is the second version that comes with a huge amount of improvements over the first one.
-It comes with a new fancy paint
-It now has 2 cylinders that can lift 2 weights simultaneously.
-The frequency changer has been improved.
-The pumps were completely redesigned so that they have more power, add pressure faster, and are more efficient leaving less particles stuck or inside the chamber.
-Hydrodynamics improvements (reduced friction smoothened angles etc...) to make the fluid travel as fast, efficiently as possible and lifting more weight.
-Added one valve to the chamber and 2 valves to the pipes so you can control the flow of fluid.
-Fixed spelling mistakes.
-Made walls thicker on higher pressure zones to avoid any leaks.
-Added 400 more particles than the older model for balancing purposes.
-Improved combined weight lifting in 100% (2400KG vs 1200KG) and single weight lifting in 33% (1600KG vs 1200KG)
It comes with a frequency changer so that you only have to press "W" to increase and "S" to decrease the frequency. It also comes with preset weights, so that you don't have to set the weight manually. The cylinders are controlled with "numpad 1" to increase the pressure and "numpad 0" to decrease pressure. The chamber valve is controlled with "DOWN ARROW" and the pipes valves are controlled with "K" (right) and "J" (left)
Any suggestions to improve the model are welcome.
.png)
