Computer NG 2.7
Made by and for this Computer Collab
Features:
CPU:
CPU R6(R4B2) (With heating script)
CPU Cooler (Made by
Bronie12345)
Memory:
StorEx 30 Mini - Built in
Slot for HDD - Compatible with new bronie's one and with [url=http://www.algodoo.com/algobox/details.php?id=35794]StorEx[url]
Programming:
AHOX Basic R5
Programming references:
To programm the computer, select the StorEx Mini cover and move it to back. Now select the transparent box that is on the left side of the StorEx (It has got ControllerAcc = 1). Then click Appearance menu, and then click Text box. Now you're ready to be programmer.
Programming commands:
["PRINT", "Hello world"] - This will add Hello World on the screen
["CLS"] - Clears the screen
["GOTO", 2] - Goes to the programm command number 2
(Note: Commands are counted from zero, so the first command is 0th)
["WAIT", 10] - This will wait 10 ms before doing next command.
["CALC", 1+1] - This will save result into scene.my.calco variable.
(Note: if you want to see the variable, use ["PRINT", scene.my.calco + ""] command.)
["KEY", "a", 2, 1] - If you will press A on the keyboard, it will go to command number 2, if not, it will go to 1.
(Note: If you are lazy to write next GOTO on number 1 (in example), just replace 1 with number of next KEY or a number of this KEY command.)
Advanced commands:
["GOHW", 2] - This will go to HDD sector number 2
["HDSEL", 2] - This will select HDD in bay 2
["CUSTOM", scene.my.variable = something] - This executes thing inside this (Thyme, not BASIC)
If you l
k like this ->
, I have an idea for you. Experiment with the commands yourself, and learn about them.
Oh, and there's an example:
[["PRINT", "Hello World"], ["WAIT", 1000], ["PRINT", "
Again? Y/N"], ["KEY", "y", 5, 4], ["KEY", "n", 8, 3], ["CLS"], ["WAIT", 1000], ["GOTO", 1], ["CLS"], ["PRINT", "Hmm..."], ["END"]]
TO RUN EVERY PROGRAMM YOU MUST TO PRESS F2!!!
Made by and for this Computer Collab
Comment and rate please!!!
ENJOY!!!
I hope I'll see some programms i the comments in here
