Algodoo

yep this needs HELP

hmmm where to start:

first off you need to learn to add center hinge
simply go to geometric actions and move the circle to the front
then go to geometric actions "add center hinge"

The second thing that must be fixed is the suspension (yikes )
just get rid of the whole suspension set up you have
now you need to use an arm suspension (like i use for most of my cars)
look at my chevy, that should be easy to see
ok now that you have replicated the type of suspension i use you need to ajust the springs. in order to do this right you must change the dampening to about .7 and the strength to 1
(you only need 1 spring per arm)
if the spring needs to be stronger, increase the density of the susp. arm to about 6

i hope this helps
any questions just comment here and i will try to answer asap

thx!
i'll do what i can