Algodoo

NOTE: I did not make this bike, I only made some minor adjustments, such as leaning (a + d) and making the rear suspension more realistic. Props for the bike go to Karczi954.

Bike controls:
-up key for front brake
-down key for back brake
-right key for accelerating right
-left key for accelerating left
-a key for leaning back
-d key for leaning forward (don't hold the leaning keys too long, rider will get stuck in an awkward position)

Track info:
The track has been devided up into two parts: a ramp section and a technical section. The technical section starts once you hit the three braking blocks.

The big drop-in is achieved by accelerating once the back tire hits the horizontal beam, and then aligning the bike with the down ramp using the arrow keys.
For the rest of the first part, accelerate while keeping the front tire on the track.

In the second, technical section, pause the simulation a lot of times, as this will be easier to restart.

When the rider dissapears, the track is finished and you would do best if you reload it if you want to start again.

The track is indeed colorful, and can be changed according to your own preferences.

The rider is one group, and can be made transparant by just selecting one part of him.

If you want to use this track for experimenting with a bike you made, keep in mind that this bike has frontwheel acceleration too, not only the rear wheel.

Phor the rest, pheel phree to comment, and haphe phun!