Image:
Author: Mibars Group: Default Filesize: 124.32 kB Date added: 2009-05-16 Rating: 5.6 Downloads: 2198 Views: 1118 Comments: 0 Ratings: 2 Times favored: 0 Made with: Phun Tags:
|
Hi there!
I'm posting my older trains that I made last year in pre-Algodoo Phun.
So here you have:
-Green locomotive - Based on EU07 (Electric Universal)
-Big yellow locomotice - Loosely based on GE Dash-9 (changed to be bidirectional, longer hood, etc).
-Tiny yellow loco - Switching locomotive based on some motorised dresin.
Plus few carriages:
-"box", "coal", long flatbed and short flatbed.
CONTROLS:
DRIVING
Q, W, E - Left, parking brake, right for green one
A, S, D - same for big diesel
Z, X, C - tiny locomotive
Numpad 0 - Parking brake for carriages
BRAKING
3 - "light" braking
6 - "medium" braking
9 - "hard" braking
Combine them to increase braking force (pressing all of them should lock wheels)
MISC:
-P and I - Pantograph.. But it's buggy!
HOW TO CONENCT UNITS:
1) Make sure that connector is lowered in ONLY ONE coupler.
1a) If it is a flatbed it has no integrated connectors! Use other carriage connector or connecting device (found on dresin)
2)Slowly drive your train onto unit you want to connect
3)It should jump into position.
HOW TO DISCONNECT UNITS:
-Manually:
1)Pause simulation
2)Rotate connector above coupler, or remove coupling device if it is flatbed
-Automaticly:
1) Put at least 300kg box on a coupler to disengage lock (you can take or copy box lying on bed of small train)
2) Wait for latches to disengage
3) Drive away
HAVE FUN! |