These program cards are a hack and some hax for the AHOX mobilePlatform device with an MX1 CPU or higher. See how they work.
How 2 Use Hack:
1. Move the program card labeled "AHOX MX1 Hack" to your components folder. Name it "mx1hack" or something...
2. Load up any AHOX mobilePlatform scene (hint: They are on Kutis96's page).
3. Import the hack into the scene.
4. Press the red button to reset the device.
5. Place the hack card on top of the program card reader.
6. Insert the card reader into the device (you don't have to push it in all the way for this card).
7. When you take the reader out of the device, the black part of the plug is seen to have been missing. For that reason, the card has the command: e.this.density=0. This is because the program card will erase the black thingy. Anything that has no density will get erased.
How 2 Use Hax:
1. Move the program card labeled "AHOX MX1 Hax" to your components folder. Name the component anything you want if you want to.
2. Load up any AHOX mobilePlatform scene.
3. Import the hax into the scene.
4. Press the red button to reset the device.
5. Place the hax card on top of the program card reader.
6. Insert the card reader into the device (you don't have to push it in all the way for this card). When this happens, Algodoo will purposely close (not crash). This is because the program card has the "quit" command, the card will program the black thingy to close Algodoo.
Credits:
Cards made by Richard Kutina
Cards programmed by Dylan Sangwanpanich
AHOX mobilePlatform by Richard Kutina
Other Notes:
The hax card was inspired by an SNPC in Garry's Mod named Dr. Hax, who throws FREAKING monitors and kills you if you touch them (there's even a SWEP for that, so you can have a monitor fight with your friends). When you insert the card reader with the MX1 Hax card on top, Algodoo will die which means it will close.
