Browse Search Popular Register Upload Rules User list Login:
Search:
Kel-Tec KSG

Image:
screenshot of the scene

Author: TheClankinator

Group: Default

Filesize: 175 kB

Date added: 2016-12-14

Rating: 6.1

Downloads: 9516

Views: 786

Comments: 3

Ratings: 3

Times favored: 0

Made with: Algodoo v2.1.0

Tags:

Scene tag
A 12 Gauge shotgun made by Kel-Tec.

This gun was focused on external use, rather than internals. I also focused on reliability. The only problem is with the firing pin, algodoo just wouldnt want to cooperate. It will work fine if you dont ram the pump forward, but it can work with pretty hard hits.

To start firing, you have to pull the safety down. (The black square just behind the trigger)

It also has a few indicators. Right above the chamber is a chamber indicator. When the red is up, there is a round in the chamber. When trying to load, if a red indicator pushes out the mag tube, the magazine is full.

The controls are in the scene

*sorry for all the spam in some message boxes as well :$*
Last edited at 2016/12/15 01:06:30 by TheClankinator
Please log in to rate this scene
edit
The Linkage
2016/12/15 00:23:10
For some reason it has zero spread. you should attach some low density polys WITH AXLES to the tip of the barrel (you don't want the barrel sharing mass with the polys)
Pretty good anyways! I only got an issue where one of the shells didn't fire but i guess it was the firing pin
Last edited at 2016/12/15 00:24:47 by The Linkage
TheClankinator
2016/12/15 01:01:04
I kept playing around with ways to make it spread but I couldnt get it. I got the axle part, but i could never get a consistent spread. It never occured to me to use a low density poly. Thanks!
The Linkage
2016/12/17 00:11:48
I actually ended up trying, and it works like this. the wedges have density 2