Algodoo

if the bullets dont work try reloading the scene

i fixed the bug with the safety (apparently it was too safe)

The rifle itself is great. The skin is pretty nice. However, there are points to improve:

-The cases do not eject. This is because your design leaves the case unsupported opposite to the extractor. There needs to be a rim of some sort on the breech face for the extractor to keep its grip until the ejector strikes. Therefore, what happens is that, because of gravity, your cartridges fall down and get stuck there, making the extractor hook useless and jamming the gun.

What I propose is the following: make the extractor fixed. It is very difficult to make good moving one. Also, make sure you add a block under the case on the breech face to make sure the cases actually eject.

-Your "free recoil system", unlike mine, has no damping in the springs. What you want to avoid is a gun flopping around after firing. The springs also jam the gun as it moves the bolt around.

-Make sure you include some sort of stop-block preventing trigger over-travel. The trigger just looks a bit weird when it is way inside the gun.

Other than these, good job!

Meerkoos. thanks for the comment, constructive criticism always helps.

you obviously have more experience than me and i am just getting in to guns so i look up to you guys Meerkoos. Ngphil, Linkage, and Yuras. so constructife criticism always inspires me to try to do the best that i can.